Receivers JETI REX
Duplex REX 7
Suitable for Elastino, also for Mini Ellipse.
| Weight[g] | 13 |
| Dimensions [mm] | 60 x 16 x 13 |
| Number of channels | 9 |
| Telemetry | Yes |
| Operational temperature [°C] | -10 … 85 |
| Compatible protocols | DUPLEX 2.4GHz EX, EX Bus |
| Antenna length [mm] | 2 x 200 |
| Supply Voltage [V] | 3,5 – 8,4 |
| Average Current [mA] | 75 |
| Satellite receiver support | Yes |
Duplex REX 7 Slim
Suitable for Elastino, also for Espadita, Eldorado,Egida.
| Weight[g] | 13 |
| Dimensions [mm] | 60 x 16 x 13 |
| Number of channels | 7 |
| Telemetry | Yes |
| Operational temperature [°C] | -10 … 85 |
| Compatible protocols | DUPLEX 2.4GHz EX, EX Bus |
| Antenna length [mm] | 2 x 200 |
| Supply Voltage [V] | 3,5 – 8,4 |
| Average Current [mA] | 85 |
| Satellite receiver support | Yes |
Duplex REX 9 Slim
Suitable for Elastino, also for Espadita, Eldorado,Egida.
We recommend this receiver if you want to use both a telemetry module (Vario) and telemetry from the YGE controller.
| Weight[g] | 13 |
| Dimensions [mm] | 42 x 28 x 11 |
| Number of channels | 9 |
| Telemetry | Yes |
| Operational temperature [°C] | -10 … 85 |
| Compatible protocols | DUPLEX 2.4GHz EX, EX Bus |
| Antenna length [mm] | 2 x 200 |
| Supply Voltage [V] | 3,5 – 8,4 |
| Average Current [mA] | 85 |
| Satellite receiver support | Yes |
Duplex REX 10
Suitable for Egida and Eldorado.
We recommend this receiver if you want to use both a telemetry module (Vario) and telemetry from the YGE controller.
| Weight [g] | 16 |
| Dimensions [mm] | 51 x 28 x 11 |
| Number of channels | 10 |
| Telemetry | Yes |
| Operational temperature [°C] | -10 … 85 |
| Compatible protocols | DUPLEX 2.4GHz EX, EX Bus |
| Antenna length [mm] | 2 x 400 |
| Supply Voltage [V] | 3,5 – 8,4 |
| Average Current [mA] | 75 |
| Satellite receiver support | Yes |
Duplex REX 12 EPC
Suitable for Elasto, also for Egida and Eldorado.
| Weight [g] | 24 |
| Dimensions [mm] | 51 x 28 x 11 |
| Number of channels | 12 |
| Telemetry | Yes |
| Operational temperature [°C] | -10 … 85 |
| Compatible protocols | DUPLEX 2.4GHz EX, EX Bus |
| Antenna length [mm] | 2 x 400 |
| Supply Voltage [V] | 3,5 – 8,4 |
| Average Current [mA] | 75 |
| Satellite receiver support | Yes |
We deliver this receiver in special production, which has been manufactured especially for us at JETI. This contains the following changes:
– No power supply plug – the series plug MPX is simply too big for snake (electric) sailer fuselage.
– No dipole antenna – in the carbon fiber hulls, the antenna must because of range out of the fuselage and the dipole antenna hinder. Missing dipole antenna minimizes the range and even without them you can easily fly with the model over the range of vision.
– Antenna length 2x200mm – Serial length of the antennas 2x400mm is simply not usable in a (electric) glider fuselage.